Intermec Trakker Antares 2410 System Manual page 295

Trakker Antares 2400 Family System Manual
Appendix A—Default Configurations and Command Syntax
RF or Ethernet Network Default Configuration (continued)
RF or Ethernet Network
Command
Network Activate
Network Loopback
Network Port
Radio MAC Address
Subnet Mask
TCP Maximum Retries
TCP/IP Maximum Transmit Timeout
Terminal IP Address
Terminal Port
OpenAir RF Network Default Configuration
OpenAir RF Network Command
Domain
Inactivity Timeout
Roaming Flag
Security Identification (ID)
Transmit Mode
Wakeup On Broadcast
802.11b RF Network Default Configuration
802.11b RF Network Command
AP Density
Maximum Sleep Duration
Medium Reservation
Microwave Robustness
Network Name
Power Management
Receive All Multicast
Reservation Threshold
Station Name
Transmit Rate
Transmit Rate Fallback
WEP Encryption
WEP Key
WEP Transmit Key
Default Value
Disabled
Disabled
23 (Telnet) for a TCP/IP network
5555 for a UDP Plus network
None
255.255.255.0
12
20 seconds
0.0.0.0
0 (random terminal port used for TCP/IP
connection)
Default Value
0
5 seconds
Allowed
None
BFSK
No (disabled)
Default Value
Low
100 ms
Enabled
Disabled
INTERMEC
Enhanced
Enabled
500
TRAKKER 2400
Maximum available
Enabled
Disabled
80211 (for WEP 64 on WEP Key 1)
1
275