Intermec Trakker Antares 2410 System Manual page 266

Chapter 6—Configuration Command Reference
Syntax: CYdata
246
Symbology Identifier Character Strings
Character String Description
AIM ISO/IEC The AIM Standard for symbology identifiers consists of a three-
standard character structure indicating the symbology and the optional
features of the symbology. For more information about the AIM
Standard for symbology identifiers, refer to the AIM ISO/IEC
Standard.
User-defined The user-defined symbology identifier is one to four ASCII
ASCII character characters in length. You can configure user-defined symbology
string identifiers to assign custom identifier strings to the bar code
symbologies.
The Symbology Identifiers command contains four parameters. To disable
or enable all symbology identifiers to the ISO/IEC Standard, you need to
configure the first two parameters. To enable a user-defined symbology
identifier, you need to configure all four parameters.
where data must be 3 to 8 digits selected from this list of parameters:
Digits 1-2: 00
01
02
03
04
05
06
08
09
10
11
12
16
17
18
19
Digit 3: 0
1
2
All Symbology IDs (Disabled or ISO/IEC
Standard Enabled)
Code 39
Code 128
Codabar
Code 93
Code 11
Interleaved 2 of 5
PDF417
MSI
Plessey
Code 2 of 5 with 2 bar start/stop codes
Code 2 of 5 with 3 bar start/stop codes
UPC-A
UPC-E
EAN-8
EAN-13
Disabled
ISO/IEC Standard (Enabled)
User-defined
Trakker Antares 2400 Family System Manual