Intermec Trakker Antares 2410 System Manual page 53

Trakker Antares 2400 Family System Manual
To upgrade the firmware using the Trakker Antares DOS Firmware Upgrade Utility
Note: Make sure you back up your custom files and applications, such as
TE 2000, dcBrowser, and ROM-DOS, so that you can reinstall them after
the upgrade procedure. For help, see "Using the Serial Port to Transfer
Applications and Files" on page 55.
1 Open the MS-DOS window, and then open the MS-DOS Prompt
Properties dialog box. On the Memory tab, set the Initial
Environment field to 4096. Close the MS-DOS window and re-open
it.
2 Connect the terminal to a PC running Windows 95/98. For help see
your user's manual.
3 Create a new directory on your PC.
4 Copy these five upgrade files to the directory that you created in Step 3:
• INSTALL.BAT
• INSTALL.INF
• README.TXT
• TKANTxxx.EXE, where xxx is the firmware revision number.
Or, TKVxxxxx.EXE, where xxxxx is the field trial release number.
• WHATSNEW.TXT
Note: If you are using Wavelink Avalanche, copy all of the Avalanche
(.AVA) files in addition to the upgrade files.
5 Access the MS-DOS window.
6 Change to the directory where the upgrade files are located.
7 Type:
INSTALL
The batch file explodes the TKANTxxx.EXE or TKVxxxxx.EXE file to
a new directory. This new directory contains all the files you need to
perform an upgrade.
8 On the terminal, press ) ; 2 4 8 or scan this bar code label:
TRAKKER Antares 2400 Menu System
*..-.*
*..-.*
The Main Menu appears.
Chapter 2—Configuring and Managing the Terminals
33