Intermec Trakker Antares 2410 System Manual page 76

Chapter 3—Developing and Using Applications
56
If you are using the FileCopy utility, you can automatically convert any
.EXE file to a binary file (.BIN) before downloading the file. If you are
using LOADER.EXE, you need to use EXE2ABS.EXE to convert the
.EXE file to a .BIN file. For help, see "Converting the Application to a
Binary File" on page 51.
To transfer applications and files to or from the terminal using the FileCopy utility
1 Connect the Trakker Antares terminal to your host computer or PC.
2 Run FileCopy on your host computer or PC. The Trakker Antares
FileCopy Utility dialog box appears.
FileCopy includes detailed online help. You can click the Help button or
press F1 to get more information.
3 Check the serial port and serial communications parameters to verify
that the settings for your PC match the values that are set for the
terminal's serial port.
Select the COM Port Setup tab to select and configure the following
a
parameters:
• PC COM port
• Trakker Antares COM port
• Communications protocol
• File Transfer protocol
• Baud rate, parity, data bits, and stop bits
Select the Serial Setup tab to verify and configure the PC's serial
b
communications parameters.
Use the TRAKKER Antares 2400 Menu System to configure the
c
serial port parameters on the terminal. For help, see the configuration
chapter in your terminal user's manual.
Trakker Antares 2400 Family System Manual