Intermec Trakker Antares 2410 System Manual page 77

Trakker Antares 2400 Family System Manual
4 Make sure the terminal is running an application that will not be
updated during the file transfer. If you are in the TRAKKER Antares
2400 Menu System, exit the menu system.
You can run the APPTSK.BIN application while transferring files. For
help, see "Running Applications on the Terminal" on page 65.
5 Select the FileCopy tab to download or upload applications and files.
In the PC filename and path field, type the path and filename
a
(filename.EXE or filename.BIN) for the file on your PC.
To select a previously used filename from a list, click the down arrow.
To view the files on your PC, click the Browse button.
In the Terminal filename and path field, type the drive and
b
filename on the terminal.
To select a previously used filename from a list, click the down arrow.
Applications must be stored on drive C. Depending on your terminal
options and configuration, you can download other files to drive C,
D, E, or G (if available).
Note: If you are downloading a DOS application that uses terminate-
and-stay resident (TSR) programs, you also need to download and
install the TSR files on the terminal. If your application uses a TSR on
drive C, transfer the TSR to drive C along with the application. If your
application uses a TSR on drive A, you need to recreate drive A to
include the TSR. For help, see "Customizing Drive A" on page 322.
6 If you are downloading a .BIN file and want to run the application on
the terminal immediately after it is downloaded, select the Run program
check box.
If you are downloading an .EXE file and want to convert it to a .BIN so
you can run it on the terminal immediately after it is downloaded, select
the Run program check box and select the Convert .EXE check box.
Chapter 3—Developing and Using Applications
57