Intermec Trakker Antares 2410 System Manual page 173

Syntax: CH8data
Trakker Antares 2400 Family System Manual
where data can be up to 10 digits corresponding to:
Digit 1: 0
1
Digit 2: 0
1
Digits See List *
3-4:
Digits See List *
5-6
Chapter 6—Configuration Command Reference
Symbology identifier (ID) disabled.
Symbology identifier enabled. Output of ]C0
indicates a single ISBT 128 bar code was read.
Output of ]C4 indicates that a pair of ISBT Code
128 bar codes was read.
Concatenation disabled.
Restricted concatenation enabled.
Left Data ID (identifier) to be matched for
restricted concatenation.
* List of valid combinations are:
=% Blood Groups and Rh
=> Expiration Date
&> Expiration Date and Time
=* Collection Date
&* Collection Date and Time
=< ISBT Product Code
=) Manufacturer ID
&) Manufacturer Lot Number
=& Concatenation Bar Code
&< National Product Code
&( National Special Test
&! Unit Exclusion Status
&; National Special Donor
=n Donation ID Number where n is a value
from 0 to 9 or uppercase A through Z
&n National Use Bar Code where n is a value
from lowercase a through z
Right Data ID to be matched for restricted
concatenation. See the list of valid combinations
for digits 3 and 4.
153