Intermec Trakker Antares 2410 System Manual page 54

Chapter 2—Configuring and Managing the Terminals
34
9 Choose System Menu > Upgrade Firmware. The Upgrade Firmware
screen appears.
UPGRADE FIRMWARE
Upgrade terminal
firmware?
Make sure the
terminal is
connected to a host
OK
CANCEL
10 Choose OK to continue. The next screen appears.
Are you sure you
want to continue?
Selecting YES will
upgrade and replace
all of the
terminal's firmware.
Selecting NO will
exit without
upgrading firmware.
NO
YES YES
11 Choose Yes to continue and upgrade the firmware. The terminal
reboots and then displays the Loader Waiting screen.
If you reach the Loader Waiting screen and cannot upgrade or continue,
press d once or œ twice to exit without upgrading the firmware. The
Boot Menu appears. Press 2 or L to access the Loader Waiting
screen.
12 On your PC in the MS-DOS window, change to the directory that
contains the upgrade files in Step 6.
13 Type:
UPGRADE
A menu appears asking you to select a communications port.
If you are using Windows 2000/NT/XP, print the UPGRADE.BAT
file. Identify the numbers that are associated with the menu selections in
Steps 15 through 18. Type:
UPGRADE X X X X
where the Xs represent the menu selection numbers.
24XXS035.eps
24XXS036.eps
Trakker Antares 2400 Family System Manual