Intermec Trakker Antares 2410 System Manual page 338

Appendix D—Using Default and Optional Applications
318
You can also scan a bar code label that you have created for the ROM-
DOS command. For example, you can scan this full ASCII bar code
label to use the DIR command:
DIR command
*DIR$M*
*DIR<CR>*
There are internal and external ROM-DOS commands. Internal
commands such as CLS and DIR are built into the main body of ROM-
DOS and are implemented within COMMAND.COM. When you load
DOS into memory, all internal commands are available. The external
ROM-DOS commands are defined on drive B. For help using ROM-
DOS commands, see a DOS manual.
Note: You must use the ROM-DOS commands that are provided on the
terminal. The ROM-DOS commands are also available from the Intermec
web site at www.intermec.com. DOS commands or ROM-DOS
commands copied from another computer will not run on a Trakker
Antares terminal.
The next table lists the ROM-DOS commands and the level of support
that is provided on the terminal.
ROM-DOS Commands in Alphabetical Order
ROM-DOS
Command Supported?
ATTRIB Yes
CD Yes
CHKDSK Limited
CHOICE Yes
CLS Yes
COPY Yes
DATE Yes
DEL Yes
DELTREE Yes
DIR Yes
39 AGaramond
nugget
External ROM-DOS
Command on
Default Drive B
Yes
Yes
Yes
Trakker Antares 2400 Family System Manual
Notes
You can only use
ATTRIB on DOS drives.
You can only use
CHKDSK on DOS
drives.
You can only use
DELTREE on DOS
drives.