Intermec Trakker Antares 2410 System Manual page 201

Default: 00000 (8x8 font size, no column spacing, no row spacing)
Menu System: Main Menu > Configuration Menu > Terminal Menu > Display
Bar Codes: To set the default value for the display spacing, scan this bar code:
Or: To set the standard spacing for a particular font type, scan one of these bar
Trakker Antares 2400 Family System Manual
B 5 pixels wide by 8 pixels high (5x8) font size
C 12 pixels wide by 12 pixels high (12x12) font size
Digits 2-3: Any two-digit column spacing value from 00 to 15.
Digits 4-5: Any two-digit row spacing value from 00 to 24.
Note: When you change the display spacing, the terminal clears the screen
of all data. Make sure all of your data is saved before changing the display
spacing.
8x8 font size, 20 columns x 16 rows
*$+DK00000*
*$+DK00000*
codes:
8x16 font size, 20 columns x 8 rows
*$+DK10000*
*$+DK10000*
16x16 font size, 10 columns x 8 rows
*$+DK20000*
*$+DK20000*
12x16 font size, 12 columns x 8 rows
*$+DK90100*
*$+DK90100*
8x10 font size, 17 columns x 12 rows
*$+DK80100*
*$+DK80100*
6x8 font size, 26 columns x 16 rows
*$+DK70000*
*$+DK70000*
5x6 font size, 32 columns x 21 rows
*$+DK60000*
*$+DK60000*
5x8 font size
*$+DKB0000*
*$+DKB0000*
Chapter 6—Configuration Command Reference
181