Intermec Trakker Antares 2410 System Manual page 192

Chapter 6—Configuration Command Reference
Bar Codes: To set the default Device Manager IP Address, scan this bar code:
Or: To set the Device Manager IP Address:
172
Default Device Manager IP Address
*$+UE0.0.0.0*
*$+UE0.0.0.0*
1 Scan this bar code:
Enter Accumulate Mode / Set Device Manager IP Address
*+/$+UE*
*+/$+UE*
2 Scan a numeric value from 0 to 255 to set an n field of the Device
Manager IP Address from these bar codes.
*0*
*0*
*2*
*2*
*4*
*4*
*6*
*6*
*8*
*8*
3 Scan this bar code:
. (Period)
*.*
*.*
4 Repeat Steps 2 and 3 to set the next three numbers in the Device
Manager IP Address field. After you scan the last address segment, go to
Step 5. Do not scan the period after the last address segment.
5 Scan this bar code:
Exit Accumulate Mode
*-/*
*-/*
*1*
*1*
*3*
*3*
*5*
*5*
*7*
*7*
*9*
*9*
Trakker Antares 2400 Family System Manual