Intermec Trakker Antares 2410 System Manual page 141

Scan: Follow these steps:
Or: You can create your own bar code labels to transmit files by creating a bar
Example: To transmit the file SHIPPING.DAT from drive C to the controller or
Trakker Antares 2400 Family System Manual
Note: To scan these bar code labels, you must configure the terminal to
use Code 39 in Full ASCII mode. For help, see "Code 39" on page 146.
1 Scan this bar code label:
Enter Accumulate Mode / Transmit File
*/K/O/E/ER/L*
*+/%%R,*
2 Scan the bar code labels for the file you want to transmit. You can scan
labels from the "Full ASCII Bar Code Chart" on page 284. The label
must use this format:
drive:fromfilename,tofilename
3 Scan this bar code label to exit Accumulate mode and transmit the file.
Exit Accumulate Mode
*-/*
*-/*
code in this command format:
%%R,drive:fromfilename,tofilename
host, use this command:
%%R,c:shipping.dat,shipping.dat
Chapter 5—Reader Command Reference
121