Intermec Trakker Antares 2410 System Manual page 67

Trakker Antares Programmable Terminal Specifications (continued)
Specification Description
Network UDP Plus provides host
protocol connectivity through the
Intermec Gateway or
DCS 30X
TCP/IP provides host
connectivity through the RF
or Ethernet network
WTP provides host
connectivity through the
Intermec Gateway or
DCS 30X
Drives and File Drive C, approximately
system 750K flash for user, up to
128 files
Drive D, optional 2MB
configurable flash memory
storage, up to 128 files
(configurable as a storage
drive or a storage space for
double-byte fonts)
Drive E, configurable (up to
256K) RAM disk, up to 128
files
Drive G, optional 2MB or
4MB extended SRAM drive,
up to 128 files
Application Programmed in Microsoft C,
customer defined, stored on
drive C. Maximum size of a
single application is 512K
(less the size of the RAM
drive, if configured).
Application Customer defined, eight
name characters with three-
character extension
Storing Multiple (maximum depends
applications on the drive space)
Developing Using Trakker Antares
applications Programmer's Software Kit
(PSK) or EZBuilder
Trakker Antares 2400 Family System Manual
Chapter 3—Developing and Using Applications
Terminals
•
2415, 2425, 2435, 2455, 2475, 2485/6 in the RF
network through an access point
•
2461, 2480/1 (with the optional Ethernet card) in the
Ethernet network
•
2415, 2425, 2435, 2455, 2475, 2485/6 in the RF
network through an access point
•
2461, 2480/1 (with the optional Ethernet card) in the
Ethernet network
•
2415, 2425, 2435, 2455, 2475, 2485/6 in the RF
network through an access point
•
2461, 2480/1 (with the optional Ethernet card) in the
Ethernet network
All terminals
All terminals
All terminals
2410, 2420, 2430, 2475, 2485/6, 2480/1 with Ethernet
connectivity
All terminals
All terminals
All terminals
All terminals
47