Intermec Trakker Antares 2410 System Manual page 78

Chapter 3—Developing and Using Applications
58
7 Click Download to copy the file from the PC to the terminal. If you
selected the Run program check box, the terminal boots, resets, and
runs the application you downloaded. Otherwise, the current
application continues to run on the terminal.
Click Upload to copy the file from the terminal to the PC.
8 To download or upload another file, repeat Step 5 through Step 7.
9 Click Exit to close the FileCopy utility.
You are ready to run the application from the terminal. For help, see
"Running Applications on the Terminal" on page 65.
To transfer applications and files to and from the terminal using VIEW246X.EXE
1 Connect the terminal to your PC running Windows 95/98. For help
connecting the terminal, see your terminal user's manual.
2 On the terminal, access the Loader Waiting screen.
Press ) ; 2 4 8 or scan this bar code label:
a
TRAKKER Antares 2400 Menu System
*..-.*
*..-.*
The Main Menu appears.
From the Main Menu, choose System Menu > Upgrade Firmware >
b
OK.
Choose Yes to continue. The terminal reboots and displays the
c
Loader Waiting screen.
Note: If you reach the Loader Waiting screen and cannot continue,
press • once or œ twice to exit. The Boot Menu appears. Press 2
or L to access the Loader Waiting screen.
3 On your PC, access an MS-DOS window.
4 Change to the directory that contains the VIEW246X.EXE application
and the FLASHLDR.BIN file.
5 Type and press Enter to run the application.
VIEW246X
6 Use these available commands to copy files to or from the terminal:
Command
dir <drive> { > filename }
Description
Displays the contents of a drive on
the terminal and creates a .txt file with
this information, where <drive>
is the name of the drive and { >
filename } is the name of the .TXT
file.
Trakker Antares 2400 Family System Manual