Intermec Trakker Antares 2410 System Manual page 264

Chapter 6—Configuration Command Reference
Syntax: NSn.n.n.n
Default: 255.255.255.0
Menu System: Main Menu > Configuration Menu > Communications Menu > Advanced
Bar Codes: To set the default subnet mask address, scan this bar code:
Or: To set the subnet mask:
244
For example, if the IP address is 192.009.150.184 and the subnet mask is
255.255.255.0, the subnetwork address is 192.009.150.0. The default
subnet mask 255.255.255.0 indicates that the terminal uses a standard IP
network mask.
where each n address segment is a number from 0 to 255. The subnet
mask field consists of four separate numbers, each separated by a period.
Network
Default Subnet Mask
*$+NS255.255.255.0*
*$+NS255.255.255.0*
1 Scan this bar code:
Enter Accumulate Mode / Set Subnet Mask
*+/$+NS*
*+/$+NS*
2 Scan a numeric value from 0 to 255 to set an n field of the subnet mask
address from these bar codes.
*0*
*0*
*2*
*2*
*4*
*4*
*6*
*6*
*8*
*8*
3 Scan this bar code:
. (Period)
*.*
*.*
*1*
*1*
*3*
*3*
*5*
*5*
*7*
*7*
*9*
*9*
Trakker Antares 2400 Family System Manual