Intermec Trakker Antares 2410 System Manual page 52

Chapter 2—Configuring and Managing the Terminals
32
Note: Trakker Antares Native terminal emulation is only supported on
terminals with firmware version 6.23 and earlier. If you want to upgrade
your firmware to version 7.0 or later and continue to use a terminal
emulation application, you can order TE 2000. For help, see your local
Intermec sales representative.
You can download the latest version of firmware from the Intermec web
site at www.intermec.com. When you download the firmware files,
you will be prompted to also download the Trakker Antares Firmware
Upgrade Utility (TAUPGRADE.EXE) and the FileCopy application
(FILECOPYx.x.EXE, where x.x is the version number). Download
TAUPGRADE.EXE if you are using a PC with Microsoft Windows
2000/NT/XP. Download FILECOPYx.x.EXE if you have or need to load
TE 2000 on your terminal.
You can upgrade your terminal firmware using the:
• Trakker Antares DOS Firmware Upgrade Utility (UPGRADE.BAT).
This utility is included with the firmware upgrade. You can use this
utility to upgrade the firmware using an MS-DOS window on a PC
with Microsoft Windows 95/98.
If you want to use the DOS Firmware Upgrade Utility on a PC with
Windows 2000/NT/XP, you can follow the upgrade procedure through
Step 13. Print the UPGRADE.BAT file. Identify the numbers that are
associated with the menu selections in Steps 15 through 18. When you
get to Step 14, type:
UPGRADE X X X X
where the Xs represent the menu selection numbers.
• Trakker Antares Firmware Upgrade Utility (TAUPGRADE.EXE).
This utility is available at no charge from the Intermec web site at
www.intermec.com. It allows you to upgrade the terminal firmware
using a Microsoft Windows interface on a PC with Microsoft Windows
2000/NT/XP.
Note: The Trakker Antares Firmware Upgrade Utility cannot be used
to upgrade terminals with 802.1x security.
• Firmware Upgrade Utility on the DCS 300.
This section describes how to use the DOS Firmware Upgrade Utility and
the Trakker Antares Firmware Upgrade Utility. For help using the
Firmware Upgrade Utility on the DCS 300, see the DCS 300 User's
Manual.
Trakker Antares 2400 Family System Manual