HindlePower ATevo Series Operations page 90

HindlePower Inc
These can be updated independently or at the same time.
Next, copy these files onto an SD Memory Card, using either a personal computer (PC) with an
SD Memory Card slot, or a USB to SD Memory Card adapter. When the files are on the SD
Memory Card transfer them to ATevo.
• Open the ATevo front panel door, and locate the SD Memory Card socket on the back of
the Main Control Board (A1).
• Directly below the socket will be a 'RE-FLASH ENABLE JUMPER'.
• Move shorting block on jumper to 'PRGM' position.
• Insert ATevo-compatible SD Memory Card with program files into socket.
• Press RESET button (SW13) located 3in / 76mm below RE-FLASH JUMPER.
• If mainapp.bin is stored on the card, the message below will appear.
• Select 'Yes' if desired. A message will confirm that the Main Application program has
updated.
• If the SD Memory Card contains the bruno.bin file, you will be prompted to upgrade the
Display Application program.
• Select 'Yes' if desired, and a message will confirm the update.
Copyright HindlePower Inc. 2021
ATevo Operations–Single Phase Input–Group II (30-100 Adc Output) - 1_en
Page 88 of 171