HindlePower ATevo Series Operations page 11

HindlePower Inc
2.2. 2.2. Equipment Misuse Examples Equipment Misuse Examples
!
Use of equipment in a manner not specified by manufacturer may impair
protection provided by the ATevo and result in SERIOUS INJURY OR DEATH
SYMBOL SYMB OL EXAMPLE EXAMPLE
Do not use the equipment for any purpose not described in this manual.
Do not operate this equipment without all guards and covers in place.
Copyright HindlePower Inc. 2021
ATevo Operations–Single Phase Input–Group II (30-100 Adc Output) - 1_en
Refer to manual.
SAFETY ALERT. Indicates that a hazardous situation exists. TO REDUCE
RISK OF INJURY OR DEATH, refer to accompanying documents, and
follow all steps or procedures as instructed.
DANGEROUS HIGH VOLTAGE inside product enclosure.
TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, do not attempt to open
enclosure or gain access to areas where you are not instructed to do so.
SERVICING IS TO BE DONE ONLY BY QUALIFIED SERVICE PERSONNEL.
Allow at least 3 minutes for internal components to discharge to a safe
level after performing lockout tagout to prevent exposure to
DANGEROUS HIGH VOLTAGE.
DANGER! Risk of Arc Flash (only for ATevo units with input voltage over
416 Vac)
EXPLOSIVE GAS can be produced from batteries during normal
operation. Never smoke, use an open flame, or create arcs in the
vicinity of the ATevo or the battery.
Do not operate equipment without all guards and/or covers in place.
Last modified: 5 May 2021
Page 9 of 171