HindlePower ATevo Series Operations page 16

HindlePower Inc
3.1. 3.1. Storing & Receiving ATevo Storing & Receiving ATevo
Storing ATevo Storing ATevo
If you store ATevo for more than a few days before installation, store it in its original shipping
container, in a temperature-controlled, dry climate. Ambient temperatures of 0 to 122 °F / -18
to 50 °C are acceptable.
Storage should not exceed two (2) years due to limited shelf life of dc filter capacitors when
they are not in service.
Receiving ATevo Receiving ATevo
The manufacturer does not assume any liability for damage during transportation or handling.
Therefore, upon receipt of ATevo (or related products) immediately unpack, inspect for damage
or shortage (Section
3.2. 3.2. Unpacking & Inspecting ATevo Unpacking & Inspecting ATevo
Carefully remove all shipping materials from ATevo, and save until you are sure ATevo is
undamaged. Remove ATevo from shipping pallet. Inspect for possible damage, using checklist
below. If damage found, follow the instructions for proper reporting in
Inspection Checklist Inspection Checklist
• Enclosure exterior and interior are not marred or dented.
• No visible damage to exterior or interior components.
• Internal components are secure.
• Printed circuit boards are firmly seated on their standoffs.
• Hardware is tight.
• Wire terminations are secure.
• User's Manual is included.
• Includes all items on packing list.
Copyright HindlePower Inc. 2021
ATevo Operations–Single Phase Input–Group II (30-100 Adc Output) - 1_en
3.2), and report issues found (Section 3.3).
Section
Last modified: 3 May 2021
3.3.
Last modified: 3 May 2021
Page 14 of 171