HindlePower ATevo Series Operations page 63

HindlePower Inc
6.4. 6.4. Configuring System Settings Configuring System Settings
This section details configuration of the ATevo system parameters, including date, time, and
LCD controls (brightness, contrast, etc.).
To enter System Settings mode, select MENU > SYSTEM SETTINGS. ATevo will display a
scrollable page of parameters.
To change a parameter, do the following:
• Navigate using UP and DOWN, and select it with EDIT/ENTER.
• Press LEFT and RIGHT to navigate to the digit to be modified
• Press UP and DOWN to change setting value.
• Once desired setting is displayed, press EDIT/ENTER to store it.
Clicking on each parameter below will reveal a screenshot of how the parameter is changed:
T T ime ime
MENU > SYSTEM SETTINGS > 'Time'
*
ATevo uses a 24-hour clock (e.g. 2:30 PM is 14:30)
Copyright HindlePower Inc. 2021
ATevo Operations–Single Phase Input–Group II (30-100 Adc Output) - 1_en
Page 61 of 171