Firmware V2.7.0 Enhancements - HindlePower ATevo Series Operations
Float battery charger phase input–group ii (30-100 adc output)
Hide thumbs
Also See for ATevo Series:
- Operating/service instructions manual (164 pages) ,
- Operating/service instructions manual (311 pages) ,
- Operating/service instructions manual (316 pages)
Table of Contents
Advertisement
HindlePower Inc
labeled manuals and/or standard drawings, please contact your sales representative or visit the
web site listed on the back cover of this manual.
17.4.
17.4. Firmware v2.7.0 Enhancements
Firmware v2.7.0 Enhancements
Firmware v2.7.0 for ATevo brings enhanced new features. Click on each of the toggles below to
learn more:
Alar
Alarm T
m Triggers
riggers
The Evo charger always had the user configurable "Common Alarm". New alarms named "High
Priority Alarm" and "Low Priority Alarm" are now available to a user who wishes to further
customize alarm priority. These alarms can be configured to close a relay on an AUX I/O and
are also readable over SCADA. Configuration is enhanced to accommodate selecting the
triggers for these new alarms in the same menu that the common alarm is configured.
Copyright HindlePower Inc. 2021
ATevo Operations–Single Phase Input–Group II (30-100 Adc Output) - 1_en
Last modified: 12 May 2021
Page 169 of 171
Advertisement
Table of Contents
