HindlePower ATevo Series Operations page 59

HindlePower Inc
High DC V High DC Voltage Alar oltage Alarm m
L L ow DC V ow DC Voltage Alar oltage Alarm m
Cur Curr r ent Limit L ent Limit Level evel
After setting the Current Limit level to the desired value and pressing EDIT/ENTER to save
the set point, configuration of Basic ATevo Set Points and Alarms is complete and the
display returns to the HOME screen.
*
The Basic ATevo Set Point mode can also be entered from the Main Menu by
selecting the BASIC SETTINGS icon.
!
If you are interrupted while adjusting settings and do not press a front panel key
for 10 minutes, Edit Mode ends automatically without saving adjustments to any
setting not previously saved with the EDIT/ENTER key.
Copyright HindlePower Inc. 2021
ATevo Operations–Single Phase Input–Group II (30-100 Adc Output) - 1_en
Last modified: 5 March 2021
Page 57 of 171