HindlePower ATevo Series Operations page 109

HindlePower Inc
any non-normal operating condition.
Hindle Health Scr Hindle Health Screens eens
Hindle Health System screens allow the user to test ATevo to ensure it is operating correctly.
Screens permit the user to simulate alarm conditions, check set points and parameters,
exercise relays, and verify indicators are working as designed. Step-by-step guidance is
provided through the testing process. To start the Hindle Health System, press the Hindle
Health Button.
Introduction & Warning Screens Introduction & Warning Screens
The first few health screens inform the user of how to navigate through the testing process
and how to track progress. The next screens warn about any hazardous conditions and
identify any tools required. To exit testing at any point, press ESC.
Test Selection Test Selection
After the initial introduction and safety screens, a screen prompts the user to select the
tests to run.
There are two (2) test selections. The second will not test alarms or
relays:
• Operation, Set points, Alarms
• Operation, Set points
Copyright HindlePower Inc. 2021
ATevo Operations–Single Phase Input–Group II (30-100 Adc Output) - 1_en
Page 107 of 171