Setting Passwords - HindlePower ATevo Series Operations

HindlePower Inc
• READ is the lowest level; it permits:
◦ viewing charger's data and status,
◦ observing measurements and set points, but
◦ it does not permit configuration changes.
• READ/WRITE is the mid level; it permits:
◦ viewing charger's data and status as in READ level, and
◦ changing charger's configuration and all set points except for passwords.
• ADMINISTRATOR is the highest level; it permits you to use and/or configure all charger
functions, features, set points and passwords.
8.4.1. 8.4.1. Access Security Features & Access Security Features &
Configure Passwords Configure Passwords
Each authorization level has a unique password – a text string of up to fourteen (14)
characters. DEFAULT ACCESS LEVEL is factory set to ADMINISTRATOR. You need
ADMINISTRATOR privilege to change any password or change the DEFAULT ACCESS level.
To access the security features and password configuration: MENU > SECURITY
ATevo Security Screen prompts you to choose from one of the security and password
configuration selections.
8.4.2.

8.4.2. Setting Passwords

Setting Passwords
To change passwords, ensure you have ADMINISTRATOR privilege (see
"Set passwords"> select from three (3) password authorization levels > set characters for that
authorization level's password
Copyright HindlePower Inc. 2021
ATevo Operations–Single Phase Input–Group II (30-100 Adc Output) - 1_en
Last modified: 1 March 2021
Last modified: 11 February 2021
previous section), then:
Page 82 of 171