HindlePower ATevo Series Operations page 83

HindlePower Inc
8.2. 8.2. Alarms Button Alarms Button
8.3. 8.3. Health Button Health Button
8.4. 8.4. Security & Passwords Security & Passwords
ATevo protects against unauthorized users modifying charger set points, accessing critical
features, and changing alarm settings. This protection is implemented by assigning and
enabling passwords to authorize access to different levels of ATevo functionality.
Three Levels of Password Protection Three Levels of Password Protection
ATevo incorporates three (3) levels of password authorization, each of which requires a unique
password to access its functions and features:
Copyright HindlePower Inc. 2021
ATevo Operations–Single Phase Input–Group II (30-100 Adc Output) - 1_en
The ALARMS button shows the Active Alarm List – four (4)
alarms per page. If more than four alarms are active, use UP
and DOWN arrows to scroll through the list.
Not all ATevo alarms have a dedicated LED alarm indicator
on the front panel. Alarms without a dedicated LED indicator
will light the COMMON alarm LED on the front panel.
The HEALTH button initiates the Hindle Health System. The
user is prompted through a series of tests that verify the
ATevo is working properly. The Hindle Health System will
verify set points, test alarms and relays, verify calibration,
and test hardware.
Test results are logged with a time and date stamp. The
health test can be aborted at any point by pressing the ESC
button. See Section 10
Hindle Health System test.
Last modified: 11 February 2021
for instructions on how to run the
Last modified: 5 March 2021
Page 81 of 171