HindlePower ATevo Series Operations page 56

HindlePower Inc
CHARGE MODES and EQUALIZE METHODS are described in
ATevo will automatically switch back to the HOME screen if no buttons are pushed for ten (10)
minutes, or by pressing ESC one or more times. Each press of ESC returns one level until HOME
is reached.
6.2. 6.2. Configuring Basic Set Points & Configuring Basic Set Points &
Alarms Alarms
The ATevo is the second generation of the AT Series microprocessor-controlled float battery
chargers. Because its configuration button sequence is identical, users of legacy ATevo
chargers will easily adapt to ATevo. This section details how to configure basic ATevo set points
and alarms found also on legacy ATevo chargers. The process is shown by both (1) video and
(2) instructions with screenshots.
Instructions by Video Instructions by Video
Copyright HindlePower Inc. 2021
ATevo Operations–Single Phase Input–Group II (30-100 Adc Output) - 1_en
Section 7.1, Modes & Methods.
Last modified: 4 May 2021
Page 54 of 171