HindlePower ATevo Series Operations page 30

HindlePower Inc
Click on the name of any individual component for detailed information and a close-up view:
A1-Main Contr A1-Main Control Boar ol Board d
Shown on top-right of silkscreen. Mounted on the ATevo front panel door. Contains display,
buttons, alarm indicators, and is responsible for battery charger controls.
A2-P A2-Power Boar ower Board d
Shown on bottom-left of silkscreen. Mounted on heat sink along left side of ATevo. Contains
most power electronic connections, and terminal blocks for remote sense and battery
temperature compensation options.
A4- A4-Auxiliary I/O Boar Auxiliary I/O Board – optional d – optional
Shown at top-left of silkscreen. Bolted to heat sink on the left side, above the Power Board.
Plugs directly into Power Board (A2).
• six (6) relays, four (4) Binary Inputs, and four (4) Analog Inputs
• relays can be configured to indicate status of six (6) different alarms or status points
• independently-isolated Binary Inputs can be configured to report ON/OFF status of
four (4) controls
• Analog Inputs include input scaling and can report the status of four (4) analog
controls referenced to the dc bus
A7-F A7-Filter Capacitor Boar ilter Capacitor Board or C1x-Capacitors
The electrolytic capacitors (C1x) filter 'ripple' from the dc output. ATevo units rated 30-50A
Copyright HindlePower Inc. 2021
ATevo Operations–Single Phase Input–Group II (30-100 Adc Output) - 1_en
d or C1x-Capacitors
Page 28 of 171