HindlePower ATevo Series Operations page 88

HindlePower Inc
The screen will briefly confirm the file was copied successfully. The event log file is written to a
file named ATgvaixx.LOG where:
• 'g' specifies charger family: (1) <= 25 A, (2) > 25A, (3) = 3 phase.
• 'v' specifies dc voltage: (A) = 12V, (B)= 24V, © = 48V, (D) = 130V, (E) = 260V.
• 'a' specifies dc current: (A) = 6A, (B) = 12 A, © = 16A, (D) = 20A, (E) = 25A.
• 'i' specifies charger iD (A-Z): per SYSTEM INFO menu.
• 'xx' is a sequential number.
Each time the event log file is stored it is written to a new file whereby 'xx' increments by one.
This prevents previous event log files stored on the SD Memory Card from being overwritten.
8.5.3. 8.5.3. Storing/Recalling Settings to/from Storing/Recalling Settings to/from
Memory Card Memory Card
All settings can be stored onto SD Memory Card, including voltage and current set points,
alarm thresholds, and relay configuration.
To copy ATevo Configuration to SD Memory Card:
MENU > SAVE:RESET SETTINGS > 'Backup to Memory Card'
The screen will briefly confirm the file was copied successfully. The configuration file is written
Copyright HindlePower Inc. 2021
ATevo Operations–Single Phase Input–Group II (30-100 Adc Output) - 1_en
Last modified: 21 May 2021
Page 86 of 171