HindlePower ATevo Series Operations page 80
Float battery charger phase input–group ii (30-100 adc output)
Hide thumbs
Also See for ATevo Series:
- Operating/service instructions manual (164 pages) ,
- Operating/service instructions manual (311 pages) ,
- Operating/service instructions manual (316 pages)
Table of Contents
Advertisement
HindlePower Inc
Copyright HindlePower Inc. 2021
ATevo Operations–Single Phase Input–Group II (30-100 Adc Output) - 1_en
Opens a list of Event Log functions. The user can view and
clear logged events and copy logs to SD memory card. See
Section 11
for instructions.
Used to exclude alarms from the Common Alarm activation
list. By default, all alarms, when active, will annunciate the
Common Alarm. See
This icon shows relay configuration and control options. Use
it to configure relays and reset or clear any latched alarm
relays. To change a relay configuration, execute the 'Relay
configuration' command then select the relay you wish to
configure.
Refer to the following sections for details on:
• Changing Main Board Relay Parameters –
• Changing Auxiliary Board Relay Parameters –
14.4
• Resetting Latched Alarm Relays –
Section 6.6
for instructions.
Section 9.6
Section 6.5
Section
Page 78 of 171
Advertisement
Table of Contents
