HindlePower ATevo Series Operations page 47

HindlePower Inc
The full command sequence shown was:
1. Press MENU to open the Main Menu screen.
2. Press DOWN to select EVENT LOGS.
3. Press EDIT/ENTER to open 'Event Logs' screen.
4. Press UP OR DOWN arrows to navigate to 'View event log'.
5. Press EDIT/ENTER to open an event log screen.
Using a full command sequence with every command in this manual would lead to needless
repetition and tedious document length. As the above example illustrates, most of the
repetition comes from listing every navigation button push. ATevo uses a simple, nearly
universal navigation system that is used by most tv remote controls. It is not necessary to list
the following navigation button pushes: UP, DOWN, RIGHT, LEFT or EDIT/ENTER. This
convention results in a streamlined sequence of ATevo-specific commands.
For our example, this is:
1. Press MENU to open the Main Menu screen.
2. Execute the EVENT LOGS command on the Main Menu.
3. Execute the 'View event log' command on the Events Logs screen.
To simplify further, we use a shorthand convention that makes use of the '>' character
between commands.
Navigation Convention: Navigation Convention: Command > Command > Command
With this convention, the previous example's command sequence is:
MENU > EVENT LOGS > 'View event log'.
Scr Screen Convention: een Convention:
In the same way that the character '>' is used between commands
in a sequence, the same character appears between a sequence of
screens.
Copyright HindlePower Inc. 2021
ATevo Operations–Single Phase Input–Group II (30-100 Adc Output) - 1_en
Last modified: 10 February 2021
Page 45 of 171