HindlePower ATevo Series Operations page 60

HindlePower Inc
6.3. 6.3. Configuring Advanced Set Points & Configuring Advanced Set Points &
Alarms Alarms
This section details the configuration of ATevo's new, more advanced features. It also details
features that may have been present in legacy ATevo Series battery chargers, where the
configuration process has been changed or simplified.
To enter Advanced Settings mode, select MENU > ADVANCED SETTINGS. ATevo will display a
scrollable page of parameters.
To change a parameter, do the following:
• Navigate using UP and DOWN, and select it with EDIT/ENTER.
• Press LEFT and RIGHT to navigate to any digit to be modified.
• Press UP and DOWN to change setting value.
• Once desired setting is displayed, press EDIT/ENTER to store it.
Clicking on each parameter below will reveal a screenshot of how the parameter is configured:
High V High Voltage Shutdown ( oltage Shutdown
Copyright HindlePower Inc. 2021
ATevo Operations–Single Phase Input–Group II (30-100 Adc Output) - 1_en
(Section 7.2 Section 7.2) )
Page 58 of 171