HindlePower ATevo Series Operations page 17

HindlePower Inc
3.3. 3.3. Reporting Damages & Making Reporting Damages & Making
Returns Returns
Reporting Damage or Shortage Reporting Damage or Shortage
If damage or shortage is found, notify the delivery person and make notation on all copies of
carrier's receipt before signing. If such is discovered after delivery, notify carrier immediately
and request an inspection. The manufacturer does not assume any liability for damage during
transportation or handling. Should the products require an inspection by (or return to) the
manufacturer, please contact your sales representative for further instructions.
Returning Damaged Equipment Returning Damaged Equipment
Returned material must be packed in compliance with shipping regulations. It is preferable to
use all original shipping materials if possible. Mark the outside of the shipping container with
manufacturer's Return Material Authorization (RMA) number.
3.4. 3.4. Moving ATevo Moving ATevo
Identifying Unit Weight Identifying Unit Weight
Once you have established that ATevo is undamaged, identify the weight of your unit using the
table below.
The ATevo enclosure does not feature top-lifting eyes for moving. Move ATevo with a forklift
using the supplied shipping pallet. Lift ATevo in Style-5054 enclosure, into a wall-mount or rack
mount installation, using a heavy-duty sling or a scissor lift. To locate ATevo in Style-5054
enclosure into a floor-mount installation, use a forklift, lifting the enclosure from the bottom
Copyright HindlePower Inc. 2021
ATevo Operations–Single Phase Input–Group II (30-100 Adc Output) - 1_en
Last modified: 5 May 2021
Page 15 of 171