Throttle Cable - BRP BOMBARDIER DS250 2006 Shop Manual

THROTTLE CABLE

Removal
WARNING
Ensure the key is turned OFF, prior to per-
forming the throttle cable removal.
NOTE: To ease reinstallation, take note cable rout-
ing.
Throttle Lever Side
Remove throttle housing cover.
vmr2006-083-006_a
1. Throttle housing cover screws
Move back rubber cap.
vmr2006-083-007
Tighten adjustment screw to its maximum.
Using long nose pliers, disconnect throttle cable
from throttle lever.
vmr2006-077
Section 04 FUEL SYSTEM
Subsection 01 (CARBURETOR AND FUEL TANK)
vmr2006-083-008_a
1. Throttle cable barrel
2. Throttle lever
Unscrew throttle adjustment screw completely
and remove cable.
vmr2006-083-009
Carburetor Side
Unscrew carburetor cover from the carburetor.
Compress the carburetor spring to expose the
throttle cable.
Push throttle cable forward out of the throttle
valve piston.
119