Front Fender Support; Rear Fender Support - BRP BOMBARDIER DS250 2006 Shop Manual

vmr2006-087-008_a
LEFT SIDE SHOWN
1. Rear frame extension bolts
Installation
To install the rear frame extension, reverse the
removal procedure.

FRONT FENDER SUPPORT

Removal
NOTE: Use the same procedure for right or left
supports.
Unscrew the bottom screw of front fender secur-
ing it to support.
vmr2006-087-009_a
LH SIDE OF FRONT FENDER SHOWN
Remove the headlamp. Refer to LIGHTS AND AC-
CESSORIES.
Remove screw and bolt attaching the top of fend-
er to the support and frame.
vmr2006-087
Section 10 BODY/FRAME
Subsection 02 (FRAME)
vmr2006-087-010_a
1. Retaining screw
2. Retaining bolt
Remove nuts retaining the support to the frame.
vmr2006-087-011_a
vmr2006-087-012_a
Remove all components attached on the support.
Installation
Reverse the removal procedure.

REAR FENDER SUPPORT

Removal
Remove rear fender. Refer to BODY.
Turn rear fender upside down.
Remove screws retaining rear fender support to
fender.
251