BRP BOMBARDIER DS250 2006 Shop Manual page 225

Section 08 REAR SUSPENSION AND AXLE
Subsection 01 (REAR SUSPENSION AND AXLE)
vmr2006-084-003_a
1. Lower bolt
Loosen drive chain.
Remove caliper from swing arm. Refer to BRAK-
ING SYSTEM.
Unscrew bolt that attach brake hose bracket to
swing arm (brake hose and parking brake cable on
European models).
vmr2006-084-027
ALL MODELS EXCEPT EUROPE
vmr2006-084-028
EUROPEAN MODELS
CAUTION: Do not let the caliper hang by the
hose and do not stretch or twist the hose.
Remove drive chain protector and RH footrest (re-
fer to BODY).
Remove drive chain from engine sprocket.
Remove swing arm bolt.
Pull back rear drive train assembly to detach swing
arm assembly with drive chain from the frame.
206
Procedure With Rear Axle Removed
NOTE: The rear axle must be removed only if the
swing arm is replaced.
Remove the lower bolt of shock absorber.
vmr2006-084-003_a
1. Lower bolt
Unscrew bolt that attach brake hose bracket to
swing arm (brake hose and parking brake cable on
European models).
vmr2006-084-027
ALL MODELS EXCEPT EUROPE
vmr2006-084-028
EUROPEAN MODELS
CAUTION: Do not let the caliper hang by the
hose and do not stretch or twist the hose.
Remove drive chain protector and RH footrest (re-
fer to BODY).
Remove drive chain from engine sprocket.
vmr2006-084