BRP BOMBARDIER DS250 2006 Shop Manual page 87

Section 03 ENGINE
Subsection 07 (MAGNETO AND STARTER DRIVE)
vmr2006-072-014
Removal
Remove magneto cover.
Remove flywheel.
Pull out starting clutch from flywheel.
Remove screws then pull out one way clutch.
vmr2006-072-012_a
1. Retaining screws
2. One way clutch
3. Starting clutch
Installation
Install one way clutch on flywheel. Properly
torque screws.
68
vmr2006-072-011_a
Install gear on one way clutch. Turn gear counter-
clockwise to ease installation.
vmr2006-072-015
vmr2006-072