Auxiliary Multifunction Switch - BRP BOMBARDIER DS250 2006 Shop Manual

Section 07 STEERING AND FRONT SUSPENSION
Subsection 01 (STEERING AND FRONT SUSPENSION)
vmr2006-083-035_a
Remove CVT air inlet hose to reach multifunction
switch connectors.
Unplug multifunction switch connectors.
Unscrew multifunction switch screws.
vmr2006-083-003_a
TYPICAL
1. Left brake lever
2. Choke lever
3. Multifunction switch screws
Separate multifunction switch from handlebar.
If necessary, remove the choke cable from the
switch. Refer to CARBURETOR AND FUEL
TANK.
Installation
For installation, reverse the removal procedure.
When installing multifunction switch, position the
switch by inserting the switch pin in the handlebar
hole.
182
vmr2006-083-004_a
TYPICAL
1. Multifunction switch pin
2. Handlebar hole
AUXILIARY MULTIFUNCTION
SWITCH
European Models Only
Replacement
Remove front cover.
vmr2006-083-035_a
Remove CVT air inlet hose to reach auxiliary
switch connector.
Unplug auxiliary switch connector.
Unplug brake switch connectors from LH brake
lever and remove screw retaining auxiliary switch
to handlebar.
vmr2006-083