Calipers - BRP BOMBARDIER DS250 2006 Shop Manual

On rear caliper, loosen lock nut on adjusting bolt.
vmr2006-085-040_a
1. Adjusting bolt
2. Lock nut
3. Caliper brake lever
Screw adjusting bolt until it touches the caliper
piston.
Tighten lock nut.
Apply parking brake and try to move vehicle. If a
minor adjustment is required, use the adjuster on
parking brake lever.
Removal
Screw in the parking brake cable adjuster on the
RH handle lever.
vmr2006-085-039_a
1. Cable adjuster
2. Parking brake cable
3. Parking brake lever
4. RH handle brake lever
Disconnect cable from rear caliper.
vmr2006-085
Section 09 BRAKING SYSTEM
Subsection 01 (FRONT AND REAR BRAKES)
vmr2006-085-042
Detach cable from swing arm and frame.
Unscrew socket screws under lever.
Remove lever plate and parking brake lever.
vmr2006-085-041_a
1. Socket screws
2. Lever plate
3. Parking brake lever
4. Cable adjuster
Detach the end of cable from lever.
Unscrew adjuster completely and remove cable
from lever housing.
Remove parking brake cable from vehicle. Note
routing for reinstallation.
Installation
The installation is the reverse of the removal pro-
cedure.

CALIPERS

Removal
Front Calipers
Loosen wheel nuts, raise vehicle and support it
securely then remove appropriate wheel.
Remove caliper bolts then the caliper.
227