BRP BOMBARDIER DS250 2006 Shop Manual page 66

vmr2006-070-009
INNER ROTOR AND OUTER ROTOR CLEARANCE
NEW
SERVICE LIMIT
Check clearance between rotor side face and
pump housing.
vmr2006-070-010
ROTOR SIDE FACE AND PUMP HOUSING
CLEARANCE
NEW
SERVICE LIMIT
Assembly
Assembly is the reverse procedure of disassem-
bly. However, pay attention to the following.
Align indent on driving shaft with that of inner ro-
tor.
Install pump shaft and roller. Install pump housing
and align pins properly.
vmr2006-070
0.15 mm (.006 in)
0.20 mm (.008 in)
0.04 - 0.09 mm
(.002 - .004 in)
0.12 mm (.005 in)
Subsection 05 (LUBRICATION SYSTEM)
vmr2006-070-011_a
vmr2006-070-012_a
Properly torque screws.
vmr2006-070-006_a
Make sure oil pump shaft can be turned freely.
Ensure to properly lock sprocket with circlip.
vmr2006-070-005_a
Section 03 ENGINE
47