BRP BOMBARDIER DS250 2006 Shop Manual page 181

Section 05 ELECTRICAL SYSTEM
Subsection 04 (LIGHTS AND ACCESSORIES)
vmr2006-079-008_a
SHIFT GEAR CONTROL MODULE
SWITCH FUNCTION
Forward
Neutral
Reverse
If wire test failed, repair/replace wire as neces-
sary.
If wire tests good, check suspected wire from
shift gear control module to pilot lamp.
vmr2006-079-008_a
SHIFT GEAR CONTROL MODULE
162
WIRE COLOR
BROWN/YELLOW
GREEN/RED
GREEN/WHITE
vmr2006-081-019
PILOT LAMP
If wire test failed, repair/replace wire as neces-
sary.
If wire tests good, try a new shift gear control
module.
Engine Overheat Lamp
When engine overheat sensor reaches a resis-
tance of 17 (equivalent to coolant temperature
of 123 °C (253 °F)), engine overheat lamp module
turns on pilot lamp.
Drain cooling system. Refer to COOLING SYS-
TEM.
Disconnect and remove sensor from engine.
vmr2006-081-001_a
Put sensor in a container filled with coolant and
heat container. Use a suitable thermometer to
measure coolant temperature.
vmr2006-081