Fuel Tank - BRP BOMBARDIER DS250 2006 Shop Manual

Section 04 FUEL SYSTEM
Subsection 01 (CARBURETOR AND FUEL TANK)
vmr2006-077-012_a
1. Fuel valve
2. Fuel filter
No fuel should leak from fuel valve in this position.
Turn fuel valve to ON to check if the valve works
properly. Close valve when fuel leaks from fuel
valve.
Removal
Turn fuel valve to OFF position.
Install a small hose pincher (P/N 295 000 076) on
the main fuel line and on the reserve fuel line then
remove all hoses from fuel valve. Identify each
hose for reinstallation.
Remove screws securing the fuel valve to frame.
vmr2006-077-012_b
1. Main fuel line
2. Reserve fuel line
3. Fuel valve screws
Installation
For installation, reverse the removal procedure.

FUEL TANK

Removal
Remove front fender. Refer to BODY.
Turn fuel valve to OFF position.
Unplug fuel line (between filter and valve) from
fuel valve.
118
vmr2006-077-012_a
1. Fuel valve
2. Fuel filter
Unscrew fuel valve from frame.
Unscrew bolts retaining the front of fuel tank to
frame.
vmr2006-077-013_a
1. Fuel tank front bolts
Remove fender bracket and rear fuel tank bolts.
vmr2006-077-014_a
1. Fender bracket
2. Fuel tank rear bolts
Turn handlebar fully to right then lift up fuel tank
and remove it from the left side of vehicle.
Installation
For installation, reverse the removal procedure.
vmr2006-077