Radiator - BRP BOMBARDIER DS250 2006 Shop Manual

vmr2006-071-007_b
Use a jumper and connect BLACK/BLUE wire from
connector to a good ground.
Fan should turn. If so, check thermo-switch and
wiring.
If fan does not turn, directly connect wires from a
12 Vdc battery to fan motor connector. If fan does
not turn, replace it. If it turns, check its fuse and
wiring.
Reconnect all connectors.
Replacement
Refer to RADIATOR.

RADIATOR

Removal
Drain cooling system.
Remove radiator shield. Refer to BODY.
Clean radiator with low pressure water and com-
pressed air as necessary.
CAUTION: Be careful with compressed air as it
could damage radiator fins.
Drain cooling system.
Remove radiator retaining screws.
vmr2006-071
Subsection 06 (COOLING SYSTEM)
vmr2006-071-006_a
Disconnect top hoses from radiator.
vmr2006-071-005_a
Remove bottom hose.
Unplug connector from thermo-switch.
Section 03 ENGINE
59