Inspection - BRP BOMBARDIER DS250 2006 Shop Manual

Section 03 ENGINE
Subsection 10 (CRANKSHAFT AND CRANKCASE)
vmr2006-075-005_a
Remove crankshaft from right half crankcase.
vmr2006-075-006_a
Remove gasket and dowel pins.
Scrape gasket residues off the crankcase contact
surface.
vmr2006-075-007
CAUTION: Pay attention not to damage contact
surface of the gasket. It is better to moisten the
gasket residue for easy scraping.
94
Drive out left half crankcase oil seal.
vmr2006-075-008

INSPECTION

Crankshaft
NOTE: Crankshaft axial play is took up by a wave
washer. If washer is worn, replace with a new
one.
Use a feeler gauge and measure axial clearance of
connecting rod big end.
vmr2006-075-009_a
AXIAL CLEARANCE
New 0.10 - 0.40 mm (.004 - .016 in)
Service limit 0.60 mm (.024 in)
vmr2006-075