BRP BOMBARDIER DS250 2006 Shop Manual page 152

vmr2006-079-010_b
All Models except Europe
IGNITION SWITCH CONNECTOR
POSITION TERMINAL
OFF
RED and
BROWN wires
ON
European Models
IGNITION SWITCH CONNECTOR
POSITION TERMINAL
OFF
RED and
BLACK wires
ON
Replace switch if defective.
If switch is good, continue the other tests.
Removal
Remove front cover. Refer to BODY.
Disconnect ignition switch connector.
Remove steering cover. Refer to STEERING AND
FRONT SUSPENSION. Disconnect ignition switch
with RED wire.
vmr2006-079
vmr2006-079-004_a
Push tabs of switch and while holding them
squeezed, push switch out.
RESISTANCE
Infinite (0L.)
0.4 max.
RESISTANCE
Infinite (0L.)
0.4 max.
vmr2006-079-011_a
Installation
Properly index switch in its hole then push until
tabs snaps in.
Install remaining components.
Section 05 ELECTRICAL SYSTEM
Subsection 02 (IGNITION SYSTEM)
133