Throttle Cable - BRP can-am OUTLANDER 2021 Series Operator's Manual

MAINTENANCE PROCEDURES
TIGHTENING TORQUE
Oil level plug
Wipe off any spillage.

Throttle Cable

Throttle Cable Lubrication (If
applicable)
The throttle cable must be lubricated
with a silicone based lubricant or an
equivalent.
WARNING
Always use a silicone-based lubri-
cant. Using another lubricant (like
a water-based lubricant) could
cause the throttle lever/cable to
become sticky and stiff.
Open the throttle lever housing.
V07I0FY
1. Remove these screws
Separate the housing.
Slide rubber protector back to expose
throttle cable adjuster.
______________
158
5 N•m ± 0.6 N•m
(44 lbf•in ± 5 lbf•in)
1
1
V07I0GY
1. Cable protector
2. Throttle cable adjuster
3. Lock nut
4. Throttle lever housing
Screw in the throttle cable adjuster.
Remove inner housing protector.
V07I0HY
1. Inner housing protector
Remove the cable from the throttle
lever housing.
NOTE: Slide cable in clip slot and re-
move the end of cable from clip.
2 3 4
1