Throttle Cable - BRP CAN-AM OUTLANDER 6x6 2017 Series Operator's Manual

Refill gearbox.
NOTICE
Use ONLY the recom-
mended type of oil.
The oil should be level with the bottom
of the oil level orifice.
NOTICE
Do not overfill.
Reinstall oil level plug.
Wipe off any spillage.

Throttle Cable

Throttle Cable Lubrication
The throttle cable must be lubricated
with silicone based lubricant or an
equivalent.
WARNING
Always use a silicone-based lubri-
cant. Using another lubricant (like
a water-based lubricant) could
cause the throttle lever/cable to
become sticky and stiff.
Open the throttle lever housing.
V07I0FY
1. Remove these screws
Separate the housing.
Slide rubber protector back to expose
throttle cable adjuster.
1
______________
MAINTENANCE PROCEDURES
1
V07I0GY
1. Cable protector
2. Throttle cable adjuster
3. Lock nut
4. Throttle lever housing
Screw in the throttle cable adjuster.
Remove inner housing protector.
V07I0HY
1. Inner housing protector
Remove the cable from the throttle
lever housing.
NOTE: Slide cable in clip slot and re-
move the end of cable from clip.
2 3 4
1
141