vmr2006-082-024_a
1. Pulley holder
2. Fixed sheave of drive pulley
Move away the drive belt.
vmr2006-082-007
Remove drive pulley sliding sheave by placing a
finger behind sliding sheave ramp plate and pull.
vmr2006-082-008_a
1. Drive pulley spacer
2. Sliding sheave of drive pulley
Disassembly of Drive Pulley
Sliding Sheave
Lift ramp plate with sliding shoes.
Withdraw spacer.
vmr2006-082
Subsection 01 (CONTINUOUSLY VARIABLE TRANSMISSION (CVT))
Section 06 TRANSMISSION
TYPICAL
1. Ramp plate
2. Sliding shoes
3. Spacer
vmr2006-082-009_a
1. Roller
2. Contact surface to sliding shoes
3. Ramp for the rollers
Cleaning of Drive Pulley
Clean pulley faces and shaft with fine steel wool
and dry cloth.
173