Master-Cylinders Of Brake Levers - BRP BOMBARDIER DS250 2006 Shop Manual

Section 09 BRAKING SYSTEM
Subsection 01 (FRONT AND REAR BRAKES)
MASTER-CYLINDERS OF
BRAKE LEVERS
Removal
Master Cylinder of LH Rear Brake Lever
Drain the rear brake lever circuit. Refer to BRAKE
FLUID REPLACEMENT in this section.
Remove banjo fitting and the sealing washers.
Unplug brake light switch connectors. Note posi-
tion of wires for reinstallation.
vmr2006-085-020_a
1. Brake fluid reservoir
2. Brake light switch connectors
3. Choke lever
Unscrew master cylinder holder bolts.
vmr2006-085-038_a
1. Master cylinder holder
2. Bolts
Remove master cylinder of rear brake lever.
Master Cylinder of RH Front Brake Lever
Drain the front brake circuit. Refer to BRAKE
FLUID REPLACEMENT in this section.
Remove banjo fitting and the sealing washers.
Unplug brake light switch connectors. The con-
nectors are located under front cover. Note posi-
tion of wires for reinstallation.
230
vmr2006-085-032_a
1. Brake light switch connectors
Unscrew master cylinder holder bolts.
vmr2006-085-021_a
1. Master cylinder holder
2. Bolts
Remove master cylinder of front brake lever.
Installation
Master Cylinders of Front or Rear Brake Levers
For installation, reverse the removal procedure.
However, pay attention to the following.
Install the master cylinder holder with the arrow in
the proper position.
vmr2006-085-022
vmr2006-085