Front Fender - BRP BOMBARDIER DS250 2006 Shop Manual

Section 10 BODY/FRAME
Subsection 01 (BODY)
Raise bottom of radiator shield to gain access to
screw heads and hold to remove them. Pull out
radiator shield.
vmr2006-071-004_a
Installation
The installation is the reverse of the removal pro-
cedure.

FRONT FENDER

Removal
Remove front cover, seat and fuel tank cover. See
procedures above.
Unscrew bolt near radiator cap.
vmr2006-086-010
Remove screws at the bottom of radiator shield.
242
vmr2006-086-011_a
Unscrew bolt and screw securing front fender to
frame and fender support (one on each side).
vmr2006-086-012_a
Remove screws at the bottom of front fender
(same on both sides).
vmr2006-086-013_a
Remove screws that attach front fender and rear
fender.
vmr2006-086-014_a
vmr2006-086