BRP BOMBARDIER DS250 2006 Shop Manual page 175

Section 05 ELECTRICAL SYSTEM
Subsection 04 (LIGHTS AND ACCESSORIES)
vmr2006-081-011_a
REAR
There should be pulsating battery voltage.
If voltage is good, replace bulb.
If voltage is not good, check wires and if good,
continue testing.
Turn Signal Switch
Remove front cover. Refer to BODY.
Disconnect switch connector with the PINK wire
coming from turn signal switch.
Using a multimeter, set it to .
Check switch as follows.
vmr2006-081-012_a
TURN SIGNAL SWITCH
SWITCH
WIRE COLOR
POSITION
OFF BLACK
BROWN/WHITE
Left turn
BLACK
Right turn BROWN/WHITE
156
RESISTANCE
PINK
Infinity (0L.)
PINK
Close to 0
If switch is out of specifications, replace multi-
function switch. See STEERING AND FRONT
SUSPENSION.
If switch is good, continue testing.
Reconnect connectors.
Hazard Control Module
vmr2006-081-013_a
1. LH headlamp
2. Hazard control module
Check module power supply as follows.
Disconnect 6-pin connector.
Use a multimeter and set it to Vdc.
Read voltage as follows.
vmr2006-081-014_a
vmr2006-081