Rear Fender - BRP BOMBARDIER DS250 2006 Shop Manual

Section 10 BODY/FRAME
Subsection 01 (BODY)
vmr2006-086-021
Carefully, remove the front fender.
vmr2006-086-022
Installation
The installation is the reverse of removal proce-
dure.

REAR FENDER

Removal
Remove seat and fuel tank cover. See procedures
above.
Remove screws at the bottom of rear fender (one
on each side).
vmr2006-086-023_a
Remove screws that attach front fender and rear
fender.
244
vmr2006-086-014_a
Unscrew bolts holding front fender and rear fender
to frame.
vmr2006-086-015_a
Remove screws under front fender side panels.
vmr2006-086-017
Using a flat screwdriver, unlock and separate front
fender and rear fender.
vmr2006-086-018
Disconnect ignition module connectors.
vmr2006-086